Surface care · Metal
Architectural metal restoration & maintenance.
Elevator doors, storefronts, railings, revolving doors and facades restored on site and kept that way, by SOLID-employed metal craftsmen nationwide.
What is architectural metal restoration?
Restore the metal. Skip the replacement.
Architectural metal restoration is the on-site repair and refinishing of decorative and functional metal, such as elevator doors, handrails, storefronts and wall panels. Technicians remove scratches, oxidation, tarnish and graffiti, recreate the original grain or polish, then seal the surface with a protective coating.
Restoring metal in place costs a fraction of replacing it and avoids long lead times and construction. A scheduled maintenance program then keeps the finish consistent instead of letting it wear down until it needs restoring again.
Inside
- ✓Elevator doors, cabs and frames
- ✓Escalators and handrails
- ✓Wall panels and columns
- ✓Vault doors and teller lines
- ✓Signage and fixtures
Outside
- ✓Storefronts and entrances
- ✓Revolving doors
- ✓Railings and canopies
- ✓Facades and cladding
- ✓Mailboxes and kiosks
Metal services
Everything from a scratch to a full restoration
Every metal and finish needs a different process. We match abrasives, compounds and coatings to the metal and its original finish, so restored areas blend in.
Scratch removal
Sanding out scratches, dents and wear marks so they disappear into the surrounding finish.
Re-graining & highlighting
Recreating the original brushed grain on satin finishes and bringing out raised details.
Polishing
Bringing mirror and high-polish finishes back to a uniform, reflective shine.
Field oxidation
Applying controlled patinas on site, from dark bronze to statuary finishes.
Finish changes
Converting a dated finish to a new look without replacing the metal.
Oiling & lacquering
Protective oils and clear lacquers that slow tarnish and fingerprints.
Full restoration
Bringing heavily neglected, corroded or vandalized metal back to its original condition.
Protective coatings & coverings
Environmentally responsible protective and sacrificial coatings, plus temporary coverings that guard finishes during construction.
In the field
Craftsmen, not a cleaning crew
Metal restoration is skilled, hands-on work. The same trained SOLID technicians handle your project from the first test area to the final protective coat.
Our own people
SOLID-employed, uniformed technicians, never subcontracted.
Proven first
A test area confirms the finish before the full job.
Protected spaces
Surrounding surfaces masked and covered while we work.
Expertise
Every metal. Every finish.
Bronze needs a different approach than stainless steel, and a mirror polish needs a different approach than a brushed satin grain. We match the process to the metal so restored areas blend in.
Metals
- ✓Bronze
- ✓Brass
- ✓Copper
- ✓Stainless steel
- ✓Anodized aluminum
- ✓Nickel
- ✓Silver
- ✓Chrome
- ✓Wrought and cast iron
Finishes
- ✓Satin and brushed
- ✓Mirror and high polish
- ✓Statuary bronze and dark patinas
- ✓Oil-rubbed and antique
- ✓Painted and powder-coated
- ✓Lacquered and clear-coated
- ✓Applied and etched designs
Problems we fix
- ✓Scratches and dents
- ✓Tarnish and oxidation
- ✓Corrosion and pitting
- ✓Fingerprints and water spots
- ✓Graffiti and vandalism
- ✓Weathering and grime buildup
- ✓Green electrolysis stains
- ✓Worn or failing lacquer
- ✓Mismatched or dated finishes
Finish conversion
Change the finish, keep the metal
Renovations often leave older metal behind. New stainless doors and fixtures go in, and mirror bronze elevator doors suddenly look out of place. Tearing them out means new fabrication, long lead times and elevators out of service.
Finish conversion changes the color and finish of the metal you already have, on site. If a component still works and only its look is the problem, converting the finish is usually faster and far less expensive than replacing it.
- ✓Match existing metal to new stainless or bronze elements
- ✓Update a dated finish to fit new brand standards
- ✓Keep elevators, lobbies and entrances open during the work
- ✓Avoid demolition, fabrication and installation costs

Traditional mirror bronze doors and surround.
Refinished on site, with surrounding surfaces masked and protected.
A contemporary stainless look, with no new panels.
How we work
From first look to lasting finish
Most work happens overnight or on weekends, so lobbies, elevators and entrances stay open.
Assess the finish
Identify the metal, its condition and the appearance you want.
Prove the method
A controlled test area confirms the result before work begins.
Complete the work
Trained SOLID technicians restore or refinish on site, usually after hours.
Plan the care
Scheduled refinishing and periodic maintenance in one ConSOLIDated Care Plan.
Programmed maintenance
Restore once, then keep it that way
Metal finishes are part of your ConSOLIDated Care Plan, combining periodic restoration with scheduled maintenance, inside and out.
Restoration
When metal is scratched, tarnished, corroded or dated.
- ✓Brings the finish back to like-new condition
- ✓Costs far less than replacement
- ✓No long lead times or construction
Scheduled maintenance
After restoration, on a frequency set by traffic and exposure.
- ✓Keeps finishes uniform between restorations
- ✓Protective coatings renewed on schedule
- ✓Exterior metal protected from weather and pollutants
Why SOLID
Metal specialists who care for every surface
How SOLID compares with a typical metal vendor.
Industries
Metal care for every kind of facility
Hotel lobbies and elevators, bank vault doors and teller lines, office towers, hospitals, stores and airports all rely on metal to look their best.
Resources & insights
Download and explore
Share these with your team, or keep them handy for budget season.
Need care for other surfaces too? Explore all surfaces →
FAQ
Metal restoration, answered
What is architectural metal restoration?
+
It is the on-site repair and refinishing of decorative and functional metal such as elevator doors, handrails, storefronts and wall panels. Technicians remove scratches, oxidation and tarnish, recreate the original grain or polish, and apply a protective coating.
Can scratched stainless steel elevator doors be repaired?
+
Yes. Scratches in stainless steel can be sanded out and the brushed grain recreated on site so the repair blends into the rest of the door. Restoring elevator doors costs far less than replacing panels.
Is it cheaper to restore metal or replace it?
+
Restoration usually costs a fraction of replacement and avoids long lead times, construction and closed areas. Replacement is typically only needed when metal is structurally damaged.
What metals and finishes do you work on?
+
Bronze, brass, copper, stainless steel, anodized aluminum, nickel, silver, chrome and iron, in satin, mirror, patina, oil-rubbed, painted, lacquered and applied-design finishes.
Do you restore exterior metal?
+
Yes. SOLID restores and maintains exterior metal including storefronts, revolving doors, railings, canopies, facades and cladding.
How do you keep brass and bronze from tarnishing?
+
After restoration, we apply protective oils, lacquers or coatings suited to the metal, then renew them on a schedule in your care plan.
Can you change a metal finish without replacing it?
+
Often, yes. Finish changes and field oxidation can update the look of existing metal, for example from polished brass to a dark bronze patina, on site.
Can bronze elevator doors be changed to stainless steel without replacing them?
+
Often, yes. Finish conversion refinishes the existing metal on site so bronze surrounds, doors and trim match new stainless steel elements, without demolition, new fabrication or taking elevators out of service for weeks.
Will metal restoration disrupt our building?
+
Most work is done overnight or on weekends, and technicians protect surrounding areas, so lobbies, elevators and entrances stay open.
Are your protective coatings environmentally responsible?
+
Yes. SOLID uses environmentally responsible coatings, so you do not have to worry about compliance.
Does SOLID care for other surfaces too?
+
Yes. SOLID cares for every surface in your facility, including stone, terrazzo, tile and grout, carpet, LVT and wood, under one contract and one invoice.
Get a metal care plan for your facility
Schedule a free site inspection. We will assess your metal, recommend restoration and maintenance, and give you a written care plan.



















